Partner Fix Expanding Foam


Partner Fix expanding foam
Polyurethane mounting and sealing foam recommended for amateurs.

Available capacity: 750 ml

Winter version available!

Usage:
  • mounting windows and doors
  • thermal insulation of water, sewage and central heating systems
  • motor vehicle cockpit sealing and soundproofing
  • crack filling in building thermal insulation
Product features:
  • perfect adhesion to rough surfaces
  • high mechanical strength and perfect adhesion to typical construction materials.
  • perfect thermal insulation and soundproofing parameters
Directions for use:
  • Clean and degrease the working substrate.
  • Before use, make sure that the can temperature is above zero (optimum temperature +20°C).
  • Shake the can well (for about 30 sec.) in order to mix all the components thoroughly.
  • Attach the applicator to the can and when applying hold the can upside down.
  • Apply the foam from the bottom to the top of the crack.
  • The crack should be filled up to 50% of its depth, maximum 5cm per layer. If the depth of the layer exceeds 5 cm a few layers should be applied.
  • After application each layer should be dampened with water by means of e.g. a sprayer.
  • After curing, remove excess mechanically (e.g. with a knife).
  • After foam is fully cured, protect it against UV radiation using e.g. plaster or paint.
Download: Logistics information:

Capacity Packaging type Bulk packaging Number of pieces
on a pallet
750 ml Can Cardboard box 16 pcs 768 pcs